Announcement

Collapse
No announcement yet.

Good to know Maybe

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Good to know Maybe

    I don't know how true this is. I have called several sources with no response. But it sounds good.

    PIN NUMBER REVERSAL (GOOD TO KNOW)
    If you should ever be forced by a robber to withdraw money from
    an ATM machine, you can notify the police by entering your Pin # in reverse.
    For example if your pin number is 1234 then you would put in 4321. The ATM recognizes
    that your pin number is backwards from the ATM card you placed in the machine.
    The machine will still give you the money you requested, but unknown to the robber,
    the police will be immediately dispatched to help you.
    This information was recently broadcasted on TV and it states that it is seldom used
    because people don't know it exists.
    Please pass this along to everyone possible.

    Please forgive me if I have offended anyone.!!
    Chuck D


    When a work lifts your spirits and inspires bold and noble thoughts in you, do not look for any other standard to judge by: the work is good, the product of a master craftsman.
    Jean De La Bruyere...

    l
    Hegner 18, Delta p-20, Griz 14 inch Band saw

  • #2
    That sounds like great information. Can you find out if it's really true?
    Then again, do you rob someone in Michigan with the risk of our conceil and carry law?
    Of course...why rob someone in Michigan regardless...we are all broke and nobody has a job.
    Perhaps I need to verify this information for when I'm in Ohio where they do have jobs.
    Jeff Powell

    Comment


    • #3
      It's a myth...but one based in truth:

      http://urbanlegends.about.com/librar...everse_pin.htm

      The condensed version is this: The technology exists to do this, but it hasn't been implemented yet.

      Bob
      www.GrobetUSA.com

      Comment


      • #4
        Afraid I have to agree with Bob. After more research I found this.
        http://www.truthorfiction.com/rumors/a/atm-911.htm
        I got back as soon as I could to delete the message but I decided to put the link on here in case someone finds themself in that predicament. Sorry for the wrong info but shortly it should be true.
        Chuck D


        When a work lifts your spirits and inspires bold and noble thoughts in you, do not look for any other standard to judge by: the work is good, the product of a master craftsman.
        Jean De La Bruyere...

        l
        Hegner 18, Delta p-20, Griz 14 inch Band saw

        Comment

        Unconfigured Ad Widget

        Collapse

        Latest Topics

        Collapse

        • Linda In Phoenix
          Reply to Shrink wrap systems
          by Linda In Phoenix
          I checked out www.ULine.com We used them years ago at the company I used to work at, and they were really reputable to work with. They have machines, guns, bags, and film. I just don't really know what works best, as well as if there is a really great priced to buy from. To date I've been a frugal...
          Yesterday, 10:01 PM
        • will8989
          Reply to Dog Puzzle - Aussie
          by will8989
          Will check out amazon tomorrow. Thanks.
          Yesterday, 09:53 PM
        • will8989
          Reply to Shrink wrap systems
          by will8989
          Well, I used to get my shrink wrap rolls from AC Moore, and just used the last roll😟. I use a heat gun but lately and only shrink the Sealife puzzles to keep the pieces in place. I only use it on puzzles because of my display board otherwise I would have broken pieces all over the place. Also easier...
          Yesterday, 09:49 PM
        • will8989
          Reply to Bruce, the one on probation
          by will8989
          He’s gotten me through some pretty tough times and always has my back so It’s the least I can do. Good thing I had the freezer stocked! That has been a time saver. I made a pot of chili on Sunday and got 6 meals out of it! As for payback, I’m getting a new shed in the spring! I had to do my flap...
          Yesterday, 09:32 PM
        • will8989
          Reply to Sundays market
          by will8989
          We did. I only went $40 over budget. I got a 73” x 12” x 3/4” curly cherry for $55. Just needs to be run through the sander and cut to size. It’s a pinkish cherry and is so pretty. A piece of deep red redwood, 2 pieces of walnut each about 12” wide. Good haul.
          Yesterday, 08:56 PM
        Working...
        X