Announcement

Collapse
No announcement yet.

Safe at home

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Safe at home

    Well we survived Halloween in Salem What a madhouse !
    My new bride had the time of her life though and that is what it is all about Took some awesome tours and absorbed a lot of history while we were there also
    We took almost 300 pictures between us. Add the 150 or so from the wedding and we have got a lot of editing and sorting to do
    Here's a few from the wedding

    ceremony.JPG ceremony2.JPG the kiss.JPG
    bride and groom.JPG

    Yes I made the book the minister is holding. My dad and her sister were best man and maid of honour. It is the only day I will actually get to be the king

    It was fun but I am glad to be home ! I'm itchin to make some sawdust !
    ...~Robert~
    DW788 and Hawk 226

    " Please let me grow to be the man my dog thinks I am "

Unconfigured Ad Widget

Collapse

Latest Topics

Collapse

  • will8989
    Reply to My beauties
    by will8989
    He puts biscuts between the long pieces, is that what you meant? He has stainless screws in the lips then puts the plugs on top of that. Scott, cutting one doesn’t take long. It’s the removing of the tiny drill hole, spraying each piece with distilled water, letting dry, sanding and sometimes flap...
    Yesterday, 10:55 AM
  • Rolf
    Reply to Cutting guide for straight cut on a scroolsaw
    by Rolf
    Like Bob said clamp a straight edge to the table and adjust it to compensate for the blade drift. There are some blades that have no or very little drift. Like the Olson PGT series it also seems to me that the Pegas MGT 3 or larger cut very straight....
    Yesterday, 07:54 AM
  • Rolf
    Reply to My beauties
    by Rolf
    I now you do beautiful work but I have to say your attention to details on these baskets is impressive. soft smooth edges, no visible glue squeeze out. And of course the cutting boards are beautiful. I am guessing that Bruce cut a spline in the end of the board and then dowels. I have not seen that...
    Yesterday, 07:49 AM
  • NC Scroller
    Reply to My beauties
    by NC Scroller
    You are one busy lady. About how long does it take to cut one?
    Yesterday, 05:51 AM
  • NC Scroller
    Reply to Hegner Multimax-18 for sale Tucson
    by NC Scroller
    Good luck.
    Yesterday, 05:47 AM
Working...
X