No announcement yet.

Bushton Manufacturing

  • Filter
  • Time
  • Show
Clear All
new posts

  • Bushton Manufacturing

    Needed a bottom blade holder for my Hawk. Called Bushton late Monday morning. When I got home today, Wednesday, the parts were here. Not too bad, Kansas to Southern Cal in about a day and a half. That's what I call great customer service

  • #2
    I'm impressed! It's good to know that some people still care about their customers.

    A day without sawdust is a day without sunshine.

    delta 650, hawk G426


    • #3
      Glad to here that they are stepping up their service.
      RBI G4 26 Hawk, EX 16 with Pegas clamps, Nova 1624 DVR XP
      Philosophy "I don't know that I can't, therefore I can"
      Proud Member of the Long Island Woodworkers Club
      And the Long Island Scrollsaw Association


      • #4
        Is their main site still There is a note on the top dated 2009 and referencing upcoming events in 2010. I've only seen kind of thing in companies that have gone under. Whats up?

        I still watch Craigs list for a steal on a G4, but this kind of thing drains confidence in the company.

        "Ever Striving, Never Arriving"


        • #5
          Hawk Woodworking Industries carries THE premier in large woodworking machines. Saws, Planers, the RouterSHOP, the PanelMASTERIII, and many more!

          This what I have for them.
          FD Mike
          SD Mike


          • #6
            I don't do websites, but what Randy brought up can really be hurting them. Mike's link goes to the same site. In late 2010 I thought about buying a Hawk. The out of date main page and it continuing into 2012 still concern me. There are no secondary pages or any links to the equipment they say are available.

            Anybody live near Bushton Kansas that can do a drive by or stop in?
            EX-16, DW-788, Dremel 1680


            • #7
              I just got a call from the owner of BUSHTON MANUFACTURING.
              They had a personnel problem. It is all solved. Just call them and they wil answer the phone.
              FD Mike
              SD Mike


              Unconfigured Ad Widget


              Latest Topics


              • handibunny
                Reply to Question about tilting head saws
                by handibunny
                It doesn’t matter whether the saw table tilts or the saw arm tilts. Either can be used for any project cut at an angle, and there’s a learning curve for each.

                I actually prefer the tilting table because the blade remains vertical. I find that at really steep angles, like 40 or 45 degrees,...
                Today, 02:10 PM
              • will8989
                Reply to What you find when cleaning out a cedar chest
                by will8989
                This is the tapestry I found in the cedar chest. We can’t identify where the pictures are from. Two among many. I also forgot to mention dad was also in the army Fife and Drum Corps and also played with a big band when he was discharged. Have to find that info....
                Today, 12:34 PM
              • will8989
                Reply to Bruce doing great
                by will8989
                What a morning. The therapists were quite pleased with what he could do. He took the wrap off today and he can walk with the walker with very little pain. It’s getting the leg completely straight that is hard to do. It’s when his brother stopped in that things went off rails. Rolf, we are talking...
                Today, 12:19 PM
              • Sandy Oaks
                Reply to Question about tilting head saws
                by Sandy Oaks
                If you are referring to 3D Compound cutting, the blade is 90 degrees to the table and not tilted. I use the tilting head for things like inlays and Carole's bowls. If you want a tilting arm, be sure it is rack and pinion. Look at other features that may fit your needs. As a Pegas dealer, I can help...
                Today, 11:32 AM
              • Jim Lowder
                Reply to Need Advice Refurbishing Somerville Excalibur 30
                by Jim Lowder
                I think the foot release was an option. I don’t see the pulley for it on the back of yours. Although it may have been removed. It is a very simple concept, it’s a cable attached to the back of the saw to release the arm
                Today, 10:10 AM