Announcement

Collapse
No announcement yet.

Merry Christmas

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Merry Christmas

    Hope everyone had a Merry Christmas thus far and that it continues for the rest of the evening! With all of the hard work I've seen on here, and knowing the amount of dust my son and I have been feverishly kicking up in the shop the past few days trying to complete all of our orders and requests, I am sure there were a whole passel o' folks that got some mighty big smiles on their faces because of the things y'all made for them. That just might be the best present I got this year - seeing some of those smiles, and thinking about the others I couldn't be there to see.
    Harbor Freight (Central Machinery) 65406 - 26"

Unconfigured Ad Widget

Collapse

Latest Topics

Collapse

  • Linda In Phoenix
    Reply to Shrink wrap systems
    by Linda In Phoenix
    What thickness of film seems to work the best for puzzles?
    The bags seem easier on the surface.
    But the film seems like it is more versatile on size variations.
    Today, 03:24 PM
  • will8989
    Reply to Bruce, the one on probation
    by will8989
    Regulations are 150 square feet, this will be 144 square feet so we are good. He’s making it that size Since the sheets are 4’ wide. And the Shelves need to be 4” above my head!! It will be very specific.
    Today, 10:32 AM
  • Sandy Oaks
    Reply to Shrink wrap systems
    by Sandy Oaks
    As a framer, we have a shrinker wrapper at ArtCrafters. Very simple. Film on a roller, sealer attached, just roll off enough film, seal the film, insert object, seal other end and shrink with a heat gum. We also use Uline as a source. Not sure where our unit can from as it was with the shop when...
    Today, 09:46 AM
  • NC Scroller
    Reply to Bruce, the one on probation
    by NC Scroller
    I would make the shed 1" less than the size permits are required for. THERE IS NO SUCH THING AS TOO MUCH SPACE....
    Today, 07:42 AM
  • NC Scroller
    Reply to Shrink wrap systems
    by NC Scroller
    I shrink wrap all my puzzles. It is the best method I have found. I do not use a cardboard backer as some do. I use shrink wrap bags that I get from Amazon or Ebay. 8" x 12" will fit 95% of the puzzles I make.

    To use the bags you will need a sealer. I have one very similar...
    Today, 07:39 AM
Working...
X