Announcement

Collapse
No announcement yet.

Brian Law's Compact Gear Clock

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Brian Law's Compact Gear Clock

    The Scroll Saw magazine says the brass parts for this clock can be supplied by Rolf. Would like to contact him.

    William Wolfe

  • #2
    Rolf is here on the forum. You might send him a personal message.
    Denny
    ArtCrafters in Dayton, TN

    Comment


    • #3
      William I will send you a PM. I just mailed my last kit to Scotland, and will have tom make up some more. I will do a material inventory later today.
      Hopefully you live in the States. International can be a pain.
      Last edited by Rolf; 10-06-2020, 09:52 AM.
      Rolf
      RBI G4 26 Hawk, EX 16 with Pegas clamps, Nova 1624 DVR XP
      Philosophy "I don't know that I can't, therefore I can"
      Proud Member of the Long Island Woodworkers Club
      And the Long Island Scrollsaw Association

      Comment

      Unconfigured Ad Widget

      Collapse

      Latest Topics

      Collapse

      • will8989
        Reply to Bruce, the one on probation
        by will8989
        Regulations are 150 square feet, this will be 144 square feet so we are good. He’s making it that size Since the sheets are 4’ wide. And the Shelves need to be 4” above my head!! It will be very specific.
        Today, 10:32 AM
      • Sandy Oaks
        Reply to Shrink wrap systems
        by Sandy Oaks
        As a framer, we have a shrinker wrapper at ArtCrafters. Very simple. Film on a roller, sealer attached, just roll off enough film, seal the film, insert object, seal other end and shrink with a heat gum. We also use Uline as a source. Not sure where our unit can from as it was with the shop when...
        Today, 09:46 AM
      • NC Scroller
        Reply to Bruce, the one on probation
        by NC Scroller
        I would make the shed 1" less than the size permits are required for. THERE IS NO SUCH THING AS TOO MUCH SPACE....
        Today, 07:42 AM
      • NC Scroller
        Reply to Shrink wrap systems
        by NC Scroller
        I shrink wrap all my puzzles. It is the best method I have found. I do not use a cardboard backer as some do. I use shrink wrap bags that I get from Amazon or Ebay. 8" x 12" will fit 95% of the puzzles I make.

        To use the bags you will need a sealer. I have one very similar...
        Today, 07:39 AM
      • Linda In Phoenix
        Reply to Shrink wrap systems
        by Linda In Phoenix
        I checked out www.ULine.com We used them years ago at the company I used to work at, and they were really reputable to work with. They have machines, guns, bags, and film. I just don't really know what works best, as well as if there is a really great priced to buy from. To date I've been a frugal...
        Yesterday, 10:01 PM
      Working...
      X