Announcement

Collapse
No announcement yet.

victorian bird Bath

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • victorian bird Bath

    can anyone help me find the pattern for this ? victorian bird bath .
    i made the bird feeder (ssw summer issue 22 ) and now want to make the bird bath to match . thanks in advance
    billyplum .

  • #2
    The birdbath was in SSW 22, the bird feeder was in SSW 15.
    There were some corrections to the plans, which we've posted here.

    Last edited by BobD (Archive); 06-21-2012, 10:09 AM.

    Comment


    • #3
      many thanks for your reply and links. but i cannot seem to find issue 22 or plans for the victorian bird BATH . thanks again bill

      Comment


      • #4
        I think this is the only way to get issue 22 unless you can find a copy on ebay or something like that. SSW Archive CD Volume 2
        Tim

        If you need a tool and don't buy it, you will pay for it and not have it

        Comment


        • #5
          Like I said, the birdfeeder was in Issue 15. The birdbath was in Issue 22. If you contact our customer service folks at [email protected], they can get you a copy of the article for a nominal fee.

          Best Regards,
          Bob Duncan
          Technical Editor

          Comment


          • #6
            thanks everyone for all your help . billyplum .

            Comment

            Unconfigured Ad Widget

            Collapse

            Latest Topics

            Collapse

            • Ennobee
              Reply to Architectural Playset
              by Ennobee
              Right now I live in the greater Houston area, which is by Texas standards 'next door', meaning you only have to drive 4 hours, 2 of them being the Houston commute. But yea, I miss the old missions. That's why I made this project.
              Today, 08:52 AM
            • Jim Lowder
              Reply to Question about tilting head saws
              by Jim Lowder
              Thank you everyone. I guess I just need to scroll more and have more patience with my abilities. You all are amazing...
              Yesterday, 08:08 PM
            • evilbadger
              Reply to Cutting Air
              by evilbadger
              How thick is that foam Randy? That turned out really nice.

              The view on the house is nice but that 11 foot 3 ceiling height is killing me....
              Yesterday, 07:56 PM
            • Rolf
              Reply to Question about tilting head saws
              by Rolf
              I have both types of saw A tilting table Hawk g426 and an Older Excalibur with a tilting head. Unlike Carole for bevel cuts I prefer the tilting head I do larger projects and it is easier for me.
              Regarding compound cuts they are cut at 90 degrees.

              If I were in the market for a new...
              Yesterday, 05:38 PM
            • handibunny
              Reply to Question about tilting head saws
              by handibunny
              If you have a good saw, and can set the table accurately, you should be good to go. Give a holler if you need help. 😁

              Randy, I swapped out the clamps on the Jet for the Pegas clamps as soon as they became available. I found the Jet clamps just too fidgety for my taste.
              Yesterday, 05:09 PM
            Working...
            X