Announcement

Collapse
No announcement yet.

Question for Jim Kape

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Question for Jim Kape

    Greetings, I am making your Travelers Chess Set from the Making Wooden Chess Sets
    Gloria ............... Two memorable things to say in life, "Hello" for the first time, and "Good-bye" for the last.

  • #2
    When you recut that, use a pencil and draw a line from where the horse's jaw connects to the neck, straight up. That is the line to follow. It is normal for the amount of "face" to vary, and I have had some very narrow faced knights. If it is consistently narrow, then back off on the angle to 25 or 20 degrees.
    -=-=-=-=-=-=-=-=-=-=-=-
    Jim
    DW788
    My scrollin' blog

    The worst day scrollin' is better than the best day o' workin'

    Comment

    Unconfigured Ad Widget

    Collapse

    Latest Topics

    Collapse

    • Jo Labre
      Reply to Festool vac and Pegas scroll saw
      by Jo Labre
      Rolf, Richard Boehl at QTE says the next shipment is expected soon and a new unit will be sent to me. From the comments in this thread it looks like it will be safe to plug the saw into the Festool. I wish I knew what caused the failure. If operator error, I don't want it to happen again....
      Today, 09:54 AM
    • Rolf
      Reply to My computer issues.
      by Rolf
      Thanks John.
      Today, 08:36 AM
    • Rolf
      Reply to Festool vac and Pegas scroll saw
      by Rolf
      The lack of service facilities is an industry wide problem not just in the SS world. To find tech savvy factory support is rare.
      I am fortunate that I can fix most anything myself. I don't have a Pegas saw or I would dig into one. The big problem is most tools like Pegas are sold by distributors...
      Today, 08:31 AM
    • Sandy Oaks
      Reply to Festool vac and Pegas scroll saw
      by Sandy Oaks
      As a Pegas dealer, I think I will chime in on this thread. It was a huge mistake to let Bob Duncan go, but I don’t know the circumstances. I Had a customer with a tension lever problem. I sent a new lever, but there was a question on how to replace it. They passed my email on to someone and he...
      Today, 08:25 AM
    • hotshot
      Reply to Festool vac and Pegas scroll saw
      by hotshot
      They need Bob back desperately....
      Today, 07:44 AM
    Working...
    X