Announcement

Collapse
No announcement yet.

How about more articles on sculptural carving?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • How about more articles on sculptural carving?

    'Lo y'all
    I don't really do 'whittling' type projects; I lean more twords the sculptural side of things (like Jeff Phares or Wyland's stuff). Could you get some more articles that'll help us out with the details on how to do those things?

    Thanks
    Sean

  • #2
    Re: How about more articles on sculptural carving?

    Thank you for the suggestion. We keep a running list of all article suggestions, and this will now be added to it. When we choose articles for each issue, we review the list to see what our readers are looking for. This helps us make sure our magazine gives our readers exactly what they are asking for.

    Comment


    • #3
      Re: How about more articles on sculptural carving?

      Rather than an article on the subject it would be better if you got a book or took a class. Sculpting is quite an art in itself. Taking an art class in sculpting at a university or college would greatly benefit your cause. Jeff does some seminars and you could learn a lot from him during one of those. As far as learning from a book it is more difficult if you have not ever done it before.

      Comment


      • #4
        Re: How about more articles on sculptural carving?

        Please include patterns in the article! Good patterns and photos if possible.

        Comment


        • #5
          Too much emphasis on skills of carving birds, duck


          [quote author=admin link=board=Magazine_Questions_And_Answers&num= 1018713433&start=0#1 date=04/16/02 at 05:55:10]
          Thank you for the suggestion.  We keep a running list of all article suggestions, and this will now be added to it.  When we choose articles for each issue, we review the list to see what our readers are looking for.  This helps us make sure our magazine gives our readers exactly what they are asking for.
          [/quote]

          Comment

          Unconfigured Ad Widget

          Collapse

          Latest Topics

          Collapse

          • Jim Lowder
            Reply to Question about tilting head saws
            by Jim Lowder
            Thank you everyone. I guess I just need to scroll more and have more patience with my abilities. You all are amazing...
            Today, 08:08 PM
          • evilbadger
            Reply to Cutting Air
            by evilbadger
            How thick is that foam Randy? That turned out really nice.

            The view on the house is nice but that 11 foot 3 ceiling height is killing me....
            Today, 07:56 PM
          • Rolf
            Reply to Question about tilting head saws
            by Rolf
            I have both types of saw A tilting table Hawk g426 and an Older Excalibur with a tilting head. Unlike Carole for bevel cuts I prefer the tilting head I do larger projects and it is easier for me.
            Regarding compound cuts they are cut at 90 degrees.

            If I were in the market for a new...
            Today, 05:38 PM
          • handibunny
            Reply to Question about tilting head saws
            by handibunny
            If you have a good saw, and can set the table accurately, you should be good to go. Give a holler if you need help. 😁

            Randy, I swapped out the clamps on the Jet for the Pegas clamps as soon as they became available. I found the Jet clamps just too fidgety for my taste.
            Today, 05:09 PM
          • Jim Lowder
            Reply to Question about tilting head saws
            by Jim Lowder
            Thank you all for the info. Sounds like it’s talent or practice issue not my saws. Wife already gave permission to buy a new one. I will wait tho
            Today, 04:51 PM
          Working...
          X