Announcement

Collapse
No announcement yet.

Can't delete a post!! Admins please delete

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Jeff P
    replied
    I try to change the link and get this error

    Error

    Error information: " 0 parsererror SyntaxError: JSON.parse: unexpected non-whitespace character after JSON data at line 1 column 127 of the JSON data"

    Leave a comment:


  • Jeff P
    started a topic Can't delete a post!! Admins please delete

    Can't delete a post!! Admins please delete

    I am trying to delete a post where I posted the wrong video youtube link

    please delete
    Dewalt 788 blade movement - side to side

Unconfigured Ad Widget

Collapse

Latest Topics

Collapse

  • Ennobee
    Reply to 10" long truck.
    by Ennobee
    Looks pretty neat. So it's from a 2x4: 3 in wide, 'bit less then 2 in. high? So how did you get the trunk cut out? You mentioned cutting the sides with a scroll saw, did you slice off two sides and then cut out the middle?...
    Today, 09:46 PM
  • vgraf
    Reply to sanding sealer or shellac
    by vgraf
    I use sanding sealer on baltic birch plywood, pine and birch if I am going to stain them. Without the sanding sealer, the stain will be blotchy. I use the water base sealer from minwax. After it drys I sand to at least 150 grit and often to 220 grit. Wipe it with a tac cloth then apply the masking...
    Today, 08:27 PM
  • Jim Finn
    Reply to 10" long truck.
    by Jim Finn
    We, our club, delivered over 900 toys last week to The Salvation Army, Ronald McDonald House, and a local children's hospital. Included were most of these trucks. (I sold a few)
    Today, 07:17 PM
  • NC Scroller
    Reply to sanding sealer or shellac
    by NC Scroller
    The real nice thing about using shellac and alcohol mix for ornaments is you only have to wait minutes before you tie in your ribbons and packaging.
    Today, 10:48 AM
  • Sandy Oaks
    Reply to sanding sealer or shellac
    by Sandy Oaks
    I do the same as Rolf. I mix Shellac 50% with alcohol and use that as a sanding sealer.
    Today, 10:33 AM
Working...
X