One question about the functionality of the message board. I rely on the "new posts" icon to let me know which threads have changed since the last time I logged on. If I sign-on and go through them all there's no problem. However, if I don't finishing looking at all the new posts before signing off (or if I'm unceremoniously dumped off by an uncooperative dial-up connection), when I log back on all the "new" posts have flipped over to "old" and I've lost the pointers to the threads I haven't yet read. Any solution to this (that I can control)?
And before someone asks, no I can't just go by the time stamps. My understanding is that the times are corrected to my time zone, but I have seen time stamps on posts that are in the future (relative to my current time)!
Please advise.
Announcement
Collapse
No announcement yet.
New posts
Collapse
Unconfigured Ad Widget
Collapse
Latest Topics
Collapse
-
Reply to Old wooden plates.by KarlBExcellent work Eugene! I've bought a few plates from Goodwill, but haven't cut them yet. I also buy almost any wood item that I can get some wood out of for cutting. i.e. coasters, tissue boxes, trays, etc.
Karl-
Channel: Wood and Materials
Today, 05:27 PM -
-
Sometimes a person just can't find a good pattern to cut a picture so they have to just make their own. Thats me setting on the running board, the picture was taken about 1973 just before I retired from the Military 1974. After I retred I drove that truck from Pensacola, Florida to Salida, Colorado...
-
Channel: New Scroll Saw Patterns or Designs
Today, 04:56 PM -
-
Like most of you out there I like to stack cut because I can finish more than 1 at a time. I've tried many ways in the past to hold everything together. I've used screws, hammer and nails, staples and clamps. The best and easyest way I have found is to use a brad gun. It leaves a very small hole and...
-
Channel: Info Exchange
Today, 03:20 PM -
-
I built these many years ago using scrap 1 inch and 2x4. Drilled as many holes as needed for tjhe different sized blades I used. It has always worked great for me and I don't have any trouble finding the blades....
-
Channel: Tools and Blades
Today, 03:05 PM -
-
I really like this set up because it is ready to use at my work bench or at my scroll saw....
-
Channel: Tools and Blades
Today, 02:54 PM -