I hit a number of forums several times a day. Sadly this forum is far and away the slowest in terms of response time. I use the NewPost function and often there is a 15-20 seconds or even more delay in the view refreshing. Now I know some of the forums I visit have less traffic but others have more traffic. Is the staff aware? If so, are there any near term solutions pending?
Announcement
Collapse
No announcement yet.
Why is the forum so slow
Collapse
X
-
Scott, I agree this forum does tend to be a little slow loading and surfing. I think it has to do with the vast wealth of knowledge contained here in. Not to mention sometimes we will have quite a few accessing the site at one time."Still Montana Mike"
"Don't worry about old age--it doesn't last that long."
Mike's Wood-n-Things LLC
Unconfigured Ad Widget
Collapse
Latest Topics
Collapse
-
Reply to Old Tool - Rebornby tgiro01Thanks - To make the box joints I used a 1/2" straight bit and my Incra jig. I used the little right angle sled that comes with the Incra fence, but now that I have the miter slot, I'll be getting or building a good coping sled....
-
Channel: Tools and Blades
Today, 05:24 PM -
-
by tgiro01I cleaned some space on my workbench to set this thing up and then had to clean some more space. I read about the 54X45CM size, but I guess I wasn't really thinking about how big it is. I put an 18 inch ruler in for scale in the "built" picture.
TBH - I wanted to get it together...-
Channel: Tools and Blades
Today, 05:15 PM -
-
Reply to Old Tool - RebornA custom setup always beats a generic mass produced one. It looks like you have everything perfectly suited to you! Awesome.
-
Channel: Tools and Blades
Today, 04:39 PM -
-
Rolf
I do not have any section of 8 1/2 x 11.
I only have the one big document. The size is 31 x 21.5 inches. If I use poster option I can print on 12 pages. I just need one pattern at a time.
I like the way it was done in with previous DVD like 48. Each pattern...-
Channel: General Scroll Saw
Today, 02:14 PM -
Comment