If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Announcement
Collapse
No announcement yet.
What happened to "Member Galleries" in the galleries section
What happened to "Member Galleries" in the galleries section
I noticed that the list of choices of where to look no longer contains Member Galleries. It always used to be on the top of the menu but it's gone. Is this intentional or did it mysteriously vanish?
Kevin
Kevin Scrollsaw Patterns Online Making holes in wood with an EX-30, Craftsman 16" VS, Dremel 1680 and 1671
Jedi, it is just hiding. You still see main and all the folders/types below it. Here is how I just got to the Members Galleries.
1) Click on one of the groups (Fretwork)
2) Down below where you can sort the images click on the dropdown for 'Quick Jump' and select the top item 'Members Galleries'.
The members galleries is a separate listing and not under Main such as Fretwork. When looking at the images in Fretwork there is a header that shows:
Home >> Main >> Fretwork (all are clickable). Clicking on Main takes you back to where you can select the other folders, clicking on Home, takes you back to where you can minimize Main but still don't see Members Gallery.
Sounds like a coding/implementation issue. But you can find them.
Sawdust King
If there is one thing I can make perfect every time it is sawdust.
Any light to shed on our quest for the Members Galleries? Why'd it change, Homeland Security issues?????
"Orphans are easier to ignore before you know their names. They're easier to ignore before you see their faces. It's easier to pretend they're not real before you hold them in your arms. But once you do, everything changes."
I just looked and it is stil there on the left menu under scrolling community look for scroller galleries.
Wayne,
It's not the scroller galleries I'm referring to. When you click on that, you have a list of options down below (alternative materials, fretwork, intarsia, etc.) but the first choice used to be "Member Galleries."
I think Aliens abducted it.
Kevin
Kevin Scrollsaw Patterns Online Making holes in wood with an EX-30, Craftsman 16" VS, Dremel 1680 and 1671
BobD - You are DA MAN!!! Must be what the "D" stands for. Thank you.
"Orphans are easier to ignore before you know their names. They're easier to ignore before you see their faces. It's easier to pretend they're not real before you hold them in your arms. But once you do, everything changes."
Do LED Strip Lights Consume a Significant Amount of Electricity?
Modern advancements in technology have opened up a plethora of energy options for people around the world. With a wide range of electrical devices available, individuals are faced with the task of choosing...
Our Judges are some of the best woodworkers I have ever met. On occasion I get asked to explain what I look for in the scrolling categories. I point out all of the nuances. I can't be a judge as I have intarsia and scroll work entries.
There may have been some crud on the tips from manufacturing.
In the ~20 years of scrolling I never cleaned the ends of my blades until recently. Even with the Pegas clamps I was having some blade slippage, I now scuff the ends of my blades with some 220 grit paper End of problem.!...
Don’t over sand them as you will shorten their usable life. Only sand as needed. Another thing to do is clear your blades before installing. Blades are coated with oil to prevent rust. Wipe the ends with alcohol or lightly sand with 320 grit.
Comment