Announcement

Collapse
No announcement yet.

Looking for Carving Forums

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Looking for Carving Forums

    Carving forums have been moved to our sister magazine's website, Wood Carving Illustrated - http://<a href="http://../" target="...trated.com</a>. Members as of 12/28/04 can use their existing login for both message boards. New members after 12/28/04 will need to create login accounts for both message boards.

    Thanks,
    Rob Starr
    Marketing Coordinator/Webmaster

Unconfigured Ad Widget

Collapse

Latest Topics

Collapse

  • tgiro01
    Reply to I admit it... I splurged on a new "toy"
    by tgiro01
    One issue I found with the insert that comes with the saw was the areas they smoothed for the kickback pawls. If the insert is leveled correctly, those areas are sitting about 1/32-inch below the table. I had a problem with some small pieces getting caught and jamming because of that. Sawstop's recommendation...
    Today, 08:18 AM
  • Rolf
    Reply to Interesting pallet
    by Rolf
    That is a definit rescue for a special project. I rarely get or use any pallet wood. But did use some from the pallet that my drill press was on. It looked like pine but was was very hard, carefully checked for nails and ran it through the drum sander with some 80 grit to get rid of any small grit.
    Today, 08:16 AM
  • Quartz43
    Reply to Carved Fretwork Pumpkin
    by Quartz43
    I wish I could post the video as it looks better with the lights blinking. I used some red clear plastic behind the eyes and nose. It was a fun project.
    Yesterday, 07:29 PM
  • Linda In Phoenix
    Reply to Interesting pallet
    by Linda In Phoenix
    Maybe a star shining to tell us something? That piece of wood is a very special piece! Good eye.
    Yesterday, 07:27 PM
  • Misouri Wayne
    Reply to Bruce, the one on probation
    by Misouri Wayne
    Tough situation. Just have to take it one day at a time.
    Yesterday, 04:55 PM
Working...
X