Announcement

Collapse
No announcement yet.

Icons in the Post

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Icons in the Post

    I can get the icon to appear in the upper left corner of a post, but don't know how to get it to appear in the body of the message?

  • #2
    Re: Icons in the Post

    The only thing I could think of was to include the icons you see below in the smiles on the right . Maybe someone could advise me on a better way but that's all I could think of.

    Comment


    • #3
      Re: Icons in the Post

      Hey Admin,

      Actually I was trying to do what you did in your response. Withj the green arrow & purple smiley face

      Comment


      • #4
        Re: Icons in the Post

        Cut Fingers,

        Go to "User CP" on the top left of the page....
        Under Settings and options select Edit Options
        Scroll to the bottom of the page
        Look under "Message Editor Interface"
        Select enhanced interface - Full WYSIWYG Editing
        Save Changes

        Now when yo make a post there should be a group of smiles to the right of the text box. Just select one of the icons when you post.

        Comment


        • #5
          Re: Icons in the Post

          Hey Admin,



          I think that worrked. Thanks

          Comment

          Unconfigured Ad Widget

          Collapse

          Latest Topics

          Collapse

          • will8989
            Reply to My beauties
            by will8989
            He puts biscuts between the long pieces, is that what you meant? He has stainless screws in the lips then puts the plugs on top of that. Scott, cutting one doesn’t take long. It’s the removing of the tiny drill hole, spraying each piece with distilled water, letting dry, sanding and sometimes flap...
            Yesterday, 10:55 AM
          • Rolf
            Reply to Cutting guide for straight cut on a scroolsaw
            by Rolf
            Like Bob said clamp a straight edge to the table and adjust it to compensate for the blade drift. There are some blades that have no or very little drift. Like the Olson PGT series it also seems to me that the Pegas MGT 3 or larger cut very straight....
            Yesterday, 07:54 AM
          • Rolf
            Reply to My beauties
            by Rolf
            I now you do beautiful work but I have to say your attention to details on these baskets is impressive. soft smooth edges, no visible glue squeeze out. And of course the cutting boards are beautiful. I am guessing that Bruce cut a spline in the end of the board and then dowels. I have not seen that...
            Yesterday, 07:49 AM
          • NC Scroller
            Reply to My beauties
            by NC Scroller
            You are one busy lady. About how long does it take to cut one?
            Yesterday, 05:51 AM
          • NC Scroller
            Reply to Hegner Multimax-18 for sale Tucson
            by NC Scroller
            Good luck.
            Yesterday, 05:47 AM
          Working...
          X