No announcement yet.

Missing Avatars

  • Filter
  • Time
  • Show
Clear All
new posts

  • Missing Avatars

    Hi Members!

    Unfortunately, I was not able to transfer your Avatars from the old message board... In addition, there is a flaw with the boards ability to allow custom avatars. The board programmers are working on a solution.

    In the meantime, I uploaded about 45 avatars for users to choose from. Some from the old message board along with some new ones... Please feel free to email me any avatars that you would like to share with the rest of the board. Below are instructions on how to add an avatar to your profile

    1. On the top of the page select "User CP"
    2. Under settings and options select "Edit Avatar"
    3. Under Pre-Defined Generic Avatars select an Avatar by clicking the appropriate radio box
    4. Last step is to select "Save Changes"
    Last edited by admin; 12-21-2004, 09:33 AM.

  • #2
    Re: Missing Avatars

    I believe I resolved the issue witht the custom avatars. Below are the instructions if someone wants to try

    1. Go to "User CP"
    2. Under Settings and options select Edit Avatar
    3. Scroll underneath the Pre-Definied Avatars
    4. Under custom avatar select the radio button "Use custom avatar"
    5. Either link to an avatar of uplac from your computer
    6. Remember to view the spec 80 by 80 pixels or 195 KB which ever is smaller

    Let me know if this workd or not.



    • #3
      I can't find the button to use custom avitar - is it available??


      • #4
        Try again. I enabled this feature. Please psot back to let me know how you made out with the custom avatar



        • #5
          Thank you! I did find the feature. Unfortunately, my picture is too big. It is a square graphic, 108kb. Any hints on how I can make it small enough to use??


          • #6
            see if this thread helps you resizing your image.


            Last edited by admin; 01-10-2005, 08:11 AM.


            Unconfigured Ad Widget


            Latest Topics


            • evilbadger
              Reply to Marc Tovar's MLT-13
              by evilbadger

              I don't remember which one I used but I think it was somewhere around #12 which is .029 diameter. Anything between 12 and 19 will work you would just adjust your slot width. There is a pattern for bending it to shape do you have that?
              Today, 05:12 AM
            • hotshot
              Reply to Old wooden plates.
              by hotshot
              Very Nice cuttings. I think my favorite is the train.
              Yesterday, 09:22 PM
            • Eugene Downes
              Old wooden plates.
              by Eugene Downes
              Over the years I've found that cutting old wooden plates can be very rewarding. Most of them are very good wood and when you finish your cut out the plate already has a nice finish on it.. I normally buy mine at yard sales or Good Will whenever I can find them....
              Yesterday, 06:45 PM
            • Eugene Downes
              Reply to Squaring scroll saw
              by Eugene Downes
              I've found in the past that you can find some very nice wood from old wooden plates. When you finish your cut out the wood already has a nice finish. I am only adding a picture of 6 but I have done many of these....
              Yesterday, 05:53 PM
            • RJweb
              Reply to Happy day
              by RJweb
              Betty, glad to see that you are having a good day, best of health to you SIL, RJ
              Yesterday, 10:46 AM